Performance Evaluation of a Cûk Converter in DC/DC Conversion System and Performance Improvement by Stage Cascading Technique
DOI: 296 Downloads 7439 Views
Author(s)
Abstract
Normally the Cûk converter is used as DC/DC converter that has two types of output voltages in magnitude that is; the output is either greater than or less than the input voltage magnitude. The basic construction of a Cûk converter is essentially a boost converter followed by a buck converter coupled by a capacitor. Unlike buck-boost converter the energy delivered by a Cûk converter is stable, easily attainable to the desired level and energy efficient. In this paper, the performance of a Cûk converter is investigated and shown that the performance can be significantly improved by two or more stage cascading.
Keywords
Cûk converter, Cascading, Buck-boost, MOSFET etc.
Cite this paper
M Mahbubur Rahman, Abdullah Al Masud,
Performance Evaluation of a Cûk Converter in DC/DC Conversion System and Performance Improvement by Stage Cascading Technique
, SCIREA Journal of Electrical Engineering.
Volume 4, Issue 1, February 2019 | PP. 1-9.
References
[ 1 ] | S. P. Singh, A. K. Gautam, S. P. Tripathi, Bhavnesh Kumar, "Performance comparison of MPPT techniques using Cuk converter for photovoltaic energy conversion system", Computational Intelligence & Communication Technology (CICT) 2017 3rd International Conference on, pp. 1-6, 2017. |
[ 2 ] | T Haripriya, Alivelu M. Parimi, U. M. Rao, "Performance evaluation of DC grid connected solar PV system for hybrid control of DC-DC boost converter", Intelligent Systems and Control (ISCO) 2016 10th International Conference on, pp. 1-6, 2016. |
[ 3 ] | Piyush Choudhary, Som Nath Mahendra, "Feedback control and simulation of DC-DC Cuk converter for solar photovoltaic array", Electrical Computer and Electronics Engineering (UPCON) 2016 IEEE Uttar Pradesh Section International Conference on, pp. 591-596, 2016. |
[ 4 ] | S Saravanan, N. Ramesh Babu,” Performance analysis of boost & Cuk converter in MPPT based PV system” 2015 International Conference on Circuits, Power and Computing Technologies [ICCPCT-2015], 19-20 March 2015, Nagercoil, India. |
[ 5 ] | Sudharshan. A, Yohan.M, Shrujan. R.V.R.S.K., Gayathri. Y, A Hybrid Wind -Solar Energy System Using Cuk - Sepic Fused Converter. Int. Journal of Engineering Research and Applications ISSN : 2248- 9622, Vol. 3, Issue 6, Nov - Dec 2013, pp.287-293. |
[ 6 ] | Positive Output Elementary Superlift Luo Converter for PV Applications Dr.G.Justin Sunil Dhas Dr.D.Anto Sahaya Dhas and Sreesna M K3 3rd International conference on Innovative Engineering Technologies (ICIET'2016) August 5 -6, 2016 Bangkok (Thailand). |
[ 7 ] | Design and Simulation of DC-DC Converters International Research Journal of Engineering and Technology (IRJET) ISSN: 2395-0056 Volume: 03 Issue: 01 | Jan -2016 |
[ 8 ] | L. S. Yang, J. F. Chen, andT. J. Liang, “Transformerless DC-DC converters with high step-up voltage gain,”IEEE Trans.onInd. Electron.,no. 8, vol. 56,pp. 3144–3152, Aug. 2009. |
[ 9 ] | Buck-Boost Converter System Modeling and Incremental Inductance Algorithm for Photovoltaic System via MATLAB/Simulink Zaghba layachi#1 ,A .Borni#2 , A.Bouchakour#3, N.Terki*4 Positive output luo-converters, voltage lift technique”iee proceeding s on electric power applications, vol. 146, no. 4, july 1999, pp. 415-432 |
[ 10 ] | Sriranjani.R,Shree Bharathi. A. and Jayalalitha. S., Design of Cuk Converter Powered by PV Array”. Research Journal of Applied Sciences, Engineering and Technology 6(5): 2013, 793-796. |
[ 11 ] | Priyadarshini, Dr.Shantharam Rai, Design, Modelling and Simulation of a PID Controller for Buck Boostand Cuk Converter.”International Journal of Science and Research (IJSR).ISSN (Online): 2319 |
[ 12 ] | M. M. Rahman and A. Hoque, “Design and Analysis of a Resonant Inverter fed from a Cûk Converter for the conversion of Alternative Energy directly into Commercial Supply Efficiently”. 5th International Conference on Electrical and Computer Engineering ICECE 2008, 20-22 December 2008, Dhaka, Bangladesh. |