Effect of porous solid in catalytic degradation of polymers
DOI: 10.54647/energy48156 96 Downloads 220865 Views
Author(s)
Abstract
In this study the author investigated the effect of non-acidic porous solid (silicalite) on the thermal degradation behavior of polypropylene and polystyrene, and found that silicalite affects the thermal degradation behavior of polypropylene and polystyrene as well as polyethylene, respectively. And for comparison with silicalite, the thermal degradation behavior with silica-alumina was studied.
Experimental results obtained by the continuous reactor showed that not only the configuration of porous solids affected the thermal degradation behavior of polymer, but also the configuration of macromolecules affected it.
Keywords
Thermal degradation; Polymer; Porous solid; Configuration; Continuous flow reactor
Cite this paper
Katsuhide Murata,
Effect of porous solid in catalytic degradation of polymers
, SCIREA Journal of Energy.
Volume 7, Issue 1, February 2022 | PP. 1-16.
10.54647/energy48156
References
[ 1 ] | Y. Ishihara, H. Nanbu, K. Saido, T. Ikemura, T. Takesue, T. Kuroki, Mechanism of gas formation in catalytic decomposition of polypropylene, Fuel 8 (1993) 1115–1119. |
[ 2 ] | G. Audisio, F. Bertini, Molecular weight and pyrolysis products distribution of polymers: I. Polystyrene, J. Anal. Appl. Pyrol. 24 (1992) 61–74. |
[ 3 ] | M.A. Uddin, Y. Sakata, A. Muto, Y. Shiraga, K. Koizumi, Y. Kanada, K. Murata, Catalytic degradation of polyethylene and polypropylene into liquid hydrocarbons with mesoporous silica, Microporous Mesoporous Mater. 21 (1998) 557–564. |
[ 4 ] | Y. Sakata, M.A. Uddin, A. Muto, Degradation of polyethylene and polypropylene into fuel oil by using solid acid and non-acid catalysts, J. Anal. Appl. Pyrol. 51 (1999) 135–155. |
[ 5 ] | K. Murata, Y. Sakata, M. Brebu, Thermal degradation of polyethylene in the presence of a non-acidic porous solid by a continuous flow reactor, J. Anal. Appl. Pyrol. 161 (2022) 105395. |
[ 6 ] | K. Murata, Y. Hirano, Y. Sakata, M.A. Uddin, Basic study on a continuous flow reactor for thermal degradation of polymers, J. Anal. Appl. Pyrol. 65 (2002) 71–90. |
[ 7 ] | K. Murata, M. Brebu, Y. Sakata, The effect of silica–alumina catalysts on degradation of polyolefins by a continuous flow reactor, J. Anal. Appl. Pyrol. 89 (2010) 30–38. |
[ 8 ] | K. Murata, K. Sato, Y. Sakata, Effect of pressure on thermal degradation of polyethylene, J. Anal. Appl. Pyrol. 71 (2004) 569–589 |